Forklift Accidents At New York City Construction Sites: Legal Remedies

Forklift use at New York construction sites is heavily regulated.

In the month of June 2014 alone, New York City experienced two fatal construction-site accidents that involved forklifts. First, 22-year-old Gustavo Tapia was reportedly crushed against a wall in Brooklyn when trying to push a manned, electric forklift up a ramp. The next week, 54-year-old Min Baz Sik died after a forklift apparently fell onto his chest at a Queens construction site.

Forklift Basics

Forklifts are small trucks designed to pick up heavy loads using extending and lifting arms or “forks” that protrude from the fronts of the vehicles. These extensions essentially scoop up freight, hold it while the vehicle carries it while moving to another location and then let the load down at the desired destination.

The New York Industrial Code

Forklifts used in construction, demolition or evacuation jobs are heavily regulated by the New York Department of Labor’s Industrial Code, a series of industrial safety rules. The Industrial Code has a long, detailed regulation history devoted completely to safety requirements for “lift and fork trucks” in construction. This forklift regulation has been in force since 1972.

Forklift Regulation

Areas in which forklift safety is regulated in the New York rule include:

Load capacity labeling
Load capacity compliance
Brakes
Even-surface operations
Hand-lift handle safety devices
Masonry unit packaging integrity
Loose masonry spillage protection
Pallet support and loading
Operator protection
Prohibited uses
Riding on forks
Audible warning devices
And more

In addition, federal workplace safety rules regulate forklift operations in great detail, including “fire protection, design, maintenance and use,” as well as operator training and certification, use around hazardous dust or materials, labeling, modification, protective equipment, fuel and battery handling, carbon monoxide output, loading, operation, maintenance and more.

Legal Remedies For New York Forklift Accidents At Construction Sites

Construction workers injured on the job in accidents involving forklifts should file for workers’ compensation for these work-related injuries. In addition, however, New York Labor Law allows an injured construction worker to file a lawsuit for injury when it was caused by the failure of the employer, owner, contractor or other responsible party to comply with certain safety regulations issued by the Department of Labor.

Violation of the Industrial Code’s forklift safety provisions can provide the basis for such a lawsuit, and anyone who was injured in a forklift construction accident should consult with an experienced New York personal injury attorney with construction accident experience.

Legal counsel can also evaluate whether other legal claims may exist under federal law, premises liability or defective product liability.

Keywords: forklift accident, New York, New York City, construction accident, legal remedy, lawsuit, New York Industrial Code, safety regulation, federal rules, construction worker, injury

Case Results

Since 1965, we’ve recovered over $1 BILLION
on behalf of our clients. read more

$2.1 million
settlement

for 33-year old electrician who fell from ladder while attempting to fit heavy cable into crown box when cable sprung back and struck him, causing him to suffer left shoulder injury with impingement.

$1.6 million
settlement

for 38-year old electrician who slipped and fell on debris on stairway with resulting cervical herniated disc and aggravation of pre-existing arthritic changes.

$2.55 million
settlement

for 42-year old electrician who fell into an uncovered, unprotected hole and suffered a severe low back injury with herniated disc(s) that required surgery at L4-5 and L5-S1 levels.

$1.75 million
settlement

for 26-year old construction worker who fell through opening in roof and fractured his wrist, requiring surgery with open reduction and internal fixation, external fixation device, and eventual fusion.

$2.5 million
settlement

for 38-year old female electrician (with history of prior neck injury) who tripped on uneven Masonite protective floor covering, and suffered neck injury with herniated discs requiring cervical fusion.

$1.2 million
settlement

during trial for 40-year old sheet metal worker who was struck in the neck and shoulder by an air conditioning unit and suffered herniated cervical discs and cervical radiculopathy.

Representing IBEW Local #3 Members For More
Than 40 Years find out more

No Recovery = No Fee
Free Initial Consultations

Call Today:
800-574-4LAW